This industrial strength workbench/work table includes surfaces are 1 inch thick with T-Mold Edges, Standard and ESD Available (laminated back edge for accessory options). 1000-lb. load capacity when evenly distributed. This bench has a fixed height of 30 inches with available options to purchase leg extenders for additional height purposes - see part number QV-1004099 for leg extenders.
Powder Coat Finished. Assembly instructions and hole pattern templates are provided for easy assembly and add-on accessory options. Footrest Options Available, see part number QV-1021532, 1021533, 1021538. ESD option includes a single ground stud and a 10-ft. ground cord.
Sign up for notification of special discounts and other savings opportunities.
|Fast Ship||Call for current lead times – (888) 508-0733|
|Worksurface/Bench Top Specifications||1 inch thick T-Mold Worksurface – also referred to as banded edges|
|Available in ESD||Yes|
|ESD Worksurface/Bench Top||ESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 1 stainless steel ground bolt in the rear corner of the top and include a 10’ ground cord|
|Weight/Load Capacity||Supports 1000 lbs. evenly distributed static load|
|Available Depth||30 and 36 inches|
|Available Length||60 and 72 inches|
|Bench Top/Worksurface Height||Fixed at 30 inches, telescoping legs available|
|Compatible Uprights||EquipMax Heavy Gauge Steel Vertical Channel – UniStrut (choose “View All Associated Products”)|
Available Sizes: 30”(D) X 60”(L) – 30”(D) X 72”(L) – 36”(D) X 72”(L)
The EquipMax 4-Leg Workbench is comprised of two (2) “H” Frame legs on each side of the bench – two legs are connected with a beam offering extra support, creating the “H” frame. These legs include floor glides for leveling and mobility. The front and rear heavy-gauge top support beams allow for 1000 lbs. of weight when evenly distributed.
The worksurface is laminated over industrial-grade particle board to a full 1” thick; hole patterns for installation are laid out in a sealed underside for easy installation. Each workbench has available options for ESD and includes single ground studs and a 10-ft. ground cord. Topping this all off with an squared front edge, with T-Mold edging for durability within tough environments.
No customer comments for the moment.
Steel Industrial ESD Workbench/Work Table 30-36" by 60-72"