This industrial strength ESD anti-static workbench / assembly table includes bench, footrest, uprights, 6" shelf, parts cup rail, electrical channel and overhead economy light.
The bench surfaces are 1 inch thick with T-Mold Edges, Standard and ESD Available (laminated back edge for accessory options). 1000-lb. load capacity when evenly distributed. There is fixed height of 30 inches with available options to purchase leg extenders for additional height purposes - see part number EM-1004099 for leg extenders.
Powder Coat Finished. Assembly instructions and hole pattern templates are provided for easy assembly and add-on accessory options. ESD option includes a single ground stud and a 10-ft. ground cord.
Sign up for notification of special discounts and other savings opportunities.
|Fast Ship||Call for current lead times – (888) 508-0733|
|Worksurface/Bench Top Specifications||1 inch thick T-Mold Worksurface – also referred to as banded edges|
|Available in ESD||Yes|
|ESD Worksurface/Bench Top||ESD Properties are tested and results are logged at the manufacturer. ESD tops are shipped with 1 stainless steel ground bolt in the rear corner of the top and include a 10’ ground cord|
|Weight/Load Capacity||Supports 1000 lbs. evenly distributed static load|
|Available Depth||30 and 36 inches|
|Available Length||60 and 72 inches|
|Bench Top/Worksurface Height||Fixed at 30 inches, telescoping legs available|
|Compatible Uprights||EquipMax Heavy Gauge Steel Vertical Channel – UniStrut (choose “View All Associated Products”)|
Available Sizes: 30”(D) X 60”(L) – 30”(D) X 72”(L) – 36”(D) X 72”(L)
The EquipMax 4-Leg Workbench is comprised of two (2) “H” Frame legs on each side of the bench – two legs are connected with a beam offering extra support, creating the “H” frame. These legs include floor glides for leveling and mobility. The front and rear heavy-gauge top support beams allow for 1000 lbs. of weight when evenly distributed.
The worksurface is laminated over industrial-grade particle board to a full 1” thick; hole patterns for installation are laid out in a sealed underside for easy installation. Each workbench has available options for ESD and includes single ground studs and a 10-ft. ground cord. Topping this all off with an squared front edge, with T-Mold edging for durability within tough environments.
48 inch height frame-mounted uprights with included hardware and mounting template exclusively for our 4-Leg Workbench. Uprights are constructed of 1-5/8 inches of heavy-duty square channel steel with 250-lb. load capacity when evenly distributed. Uprights are powder coat painted to match the color choice of your workbench; make sure to check color match.
Upper-Shelf made specifically for the EquipMax Uprights part number #EM-08713-0001. Shelves mount to the uprights with provided brackets that double as shelf book ends. - mount to part number #EM-08713-0001. Weight capacity is 100 lbs., evenly distributed. Shelves are powder coat painted to match the color of your EquipMax uprights - part number #EM-08713-0001; make sure to review color match.
The Bin Rail is an accessory option for the EquipMax Uprights Part #EM-08713-0001. Expands the full width of the bench and accepts industry standard parts cup.
48 inches in length with eight 15 amp (8) Power outlets and a 6 foot cord. Constructed of eight (8) gauge Aluminum. Meets UL 1363 standards and are CSA approved.
Overhead light is an accessory option for the EquipMax Workbench Uprights Part #EM-080713-0001. Hardware is included with the light and the attachment brackets and beam for the light are painted Black. The light includes an on/off switch located on the 8-ft power cord. The prismatic diffuser offers the widest angle of light diffusion. Accepts two (2) energy-efficient fluorescent tubes (not included).
Footrest brackets are painted to selected choice and the footrest has a silver finish. Non-Skid tape along the top side of the footrest for foot security. Footrest has a Heavy Duty Tubular Design and adjusts front to rear. Hardware for easy installation is included.
No customer comments for the moment.
ESD Workbench Assembly Table - Industrial Strength